Cleerline SSF-TKITE-100 매뉴얼 - 페이지 9

{카테고리_이름} Cleerline SSF-TKITE-100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cleerline SSF-TKITE-100 19 페이지. Fiber test kit
Cleerline SSF-TKITE-100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

1. Do not look into the laser beam when unit is on. Light

emitted is infrared and not visible to the human eye. To

avoid the risk of eye damage, do not look into the laser at

any time when the unit is active.

Turning the Unit On/Off

1. Press

and hold for 1 second to turn on the unit. Press and

hold for two seconds to power off the light source.

2. To turn the auto shut-off function on or off, with the light source

turned on press

3. The unit's automatic backlight will be enabled when the light

source is turned on. It will turn off after 1 minute of inactivity.

Press any key to reactivate.

Laser Output

1. Press

to choose wavelength.

2. Press

to select modulation.

3. The light source will output the desired laser settings.

Battery Replacement

1. If the battery level is low, turn off the unit immediately and

replace the batteries.

2. Remove the batteries if light source is not in use for an extended

period of time.

Handheld Optical Light Source

Operation

Warning