FITOP CTS Series 사용 설명서 - 페이지 7

{카테고리_이름} FITOP CTS Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FITOP CTS Series 13 페이지. Electric chain hoist

페이지 인쇄

3. 3. 3. 3.Examination

Examination

and

Examination

Examination and

and Maintenance:

and

3.1

Daily

examination:

3.1 Daily

3.1

Daily examination:

examination: Each

3.1.1 Is the up and down operation of the hoist correct?

3.1.2 Listen for any unusual noises?

3.1.3 Do the limit switches and the holding brake work correctly?

3.1.4 Does the hook rotate freely and is the latch working?

3.1.5 Is the load chain twisted or damaged?

3.1.6 Is the load chain clean, free of corrosion and well lubricated?

3.2

Monthly

examination:

3.2 Monthly

3.2

Monthly examination:

examination:

3.2.1 Examination of load chain:

• Your FITOP electric chain hoist has been furnished with special calibrated grade #80 load chains

that are available through FITOP authorized dealers only.

• The load chain must be replaced if it is stretched or worn beyond allowable, refer to diagram 20

for proper chain specifications.(ref. Picture 20)

PICTURE 20

• Do not use worn, damaged or stretched

load chain or attempt to repair it.

• Use the chain limit gauge (ref. Picture 21)

to test if the chain is within allowable limits,

if it is not it must be replaced immediately!

Maintenance:

Each

day

perform

Each day

day perform

perform the

Diameter

φ5.6

φ7.1

φ10.0

φ11.2

the

following

maintenance

the following

following maintenance

maintenance checks

Pitch

17.0

20.2

30.0

34.0

- 5 -

checks

listed

checks listed

listed below

Inside width

Outside width

7.0

8.9

12.5

14.0

UNIT: mm

Diagram: 20

PICTURE 21

below

below: : : :

below

18.6

23.2

33.2

37.2