FITOP CTS Series Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyciągarki FITOP CTS Series. FITOP CTS Series 13 stron. Electric chain hoist
Drukuj stronę3. 3. 3. 3.Examination
Examination
and
Examination
Examination and
and Maintenance:
and
3.1
3.1
Daily
Daily
examination:
examination:
3.1 Daily
3.1
Daily examination:
examination: Each
3.1.1 Is the up and down operation of the hoist correct?
3.1.2 Listen for any unusual noises?
3.1.3 Do the limit switches and the holding brake work correctly?
3.1.4 Does the hook rotate freely and is the latch working?
3.1.5 Is the load chain twisted or damaged?
3.1.6 Is the load chain clean, free of corrosion and well lubricated?
3.2
3.2
Monthly
Monthly
examination:
examination:
3.2 Monthly
3.2
Monthly examination:
examination:
3.2.1 Examination of load chain:
• Your FITOP electric chain hoist has been furnished with special calibrated grade #80 load chains
that are available through FITOP authorized dealers only.
• The load chain must be replaced if it is stretched or worn beyond allowable, refer to diagram 20
for proper chain specifications.(ref. Picture 20)
PICTURE 20
• Do not use worn, damaged or stretched
load chain or attempt to repair it.
• Use the chain limit gauge (ref. Picture 21)
to test if the chain is within allowable limits,
if it is not it must be replaced immediately!
Maintenance:
Maintenance:
Maintenance:
Each
Each
day
day
perform
perform
Each day
day perform
perform the
d.
Diameter
φ5.6
φ7.1
φ10.0
φ11.2
the
the
following
following
maintenance
maintenance
the following
following maintenance
maintenance checks
P.
Pitch
17.0
20.2
30.0
34.0
- 5 -
checks
checks
listed
listed
checks listed
listed below
a.
Inside width
Outside width
7.0
8.9
12.5
14.0
UNIT: mm
Diagram: 20
PICTURE 21
below
below: : : :
below
b.
18.6
23.2
33.2
37.2