djpower V-4 사용자 설명서 - 페이지 11
{카테고리_이름} djpower V-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower V-4 17 페이지. Super spark machine
페이지 인쇄2
Safety Channel
5.5
Correspondence of Spark Height & Spark Density
The internal temperature increases dramatically after continuous high-level output, which
might cause clogging and failure.
5.6
Run-Time
5.6.1
Check Remaining Time
In, on-device control mode, press <MENU> repeatedly until the following page shows on the display to
check the remaining run-time.
5.6.2
Run-Time is Up
There's no remaining run-time for machine to continue output when this page shows. Swipe a new card
to top up run-time.
On-device Control Mode
Time is Up
086 - 110
111 - 135
136 - 160
161 - 185
186 - 210
211 - 235
236 - 255
0 - 9
10 - 60
61 - 120
121 - 182
183 - 255
Spark Height
Height level 1 (Minimum)
Height level 2
Height level 3
Height level 4
Height level 5
Height level 6
Height level 7
Height level 8
Height level 9
Height level 10 (Maximum)
E5
Spark height level 4
Spark height level 5
Spark height level 6
Spark height level 7
Spark height level 8
Spark height level 9
Spark height level 10
Device enabled
Consumable cleaning up
Emergency stop / Device disabled
Auto Heat-up OFF, spark output (channel 1) disabled
Auto Heat-up ON, spark output (channel 1) disabled
Spark Density
Density level 1 (Minimum)
Density level 2
Density level 3
Density level 4
Density level 5
Density level 6
Density level 7
Density level 8
Density level 9
Density level 10 (Maximum)
Remaining Time
25 Min 00 Sec
DMX Mode
- 10 -
Time is Up
E5
DMX Address
1