djpower V-4 사용자 설명서 - 페이지 7

{카테고리_이름} djpower V-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower V-4 17 페이지. Super spark machine

Connection
AC Live
AC Neutral
AC Ground
4.3
Resetting the Breaker
This product is equipped with a resettable breaker. If the breaker trips, all sections of this product will lose
power.
Remove the power cord from mains power.
Allow unit to cool for 15 minutes.
After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
Plug the product's power cord into the power outlet and continue using as recommended.
4.4
DMX Linking
You can link the V-4 to a DMX controller using a 3- or 5-pin DMX connection. If using other DMX-
compatible products with this product, you can control each individually with a single DMX controller.
Instructions for connecting and configuring this product for DMX operation are in the User Manual.
4.5
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
4.5.1
Orientation
For safety reasons, we do not recommend mounting the product in any capacity. Operate the product
while it is on the ground only, and make sure there is adequate room for ventilation, configuration, and
maintenance.
4.5.2
Rigging
DJPOWER recommends using the following general guidelines when mounting this product.
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight (see the Technical Specifications).
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
5 OPERATION
5.1

Preparing for Operation

After checking that all the parts are intact and complete, position the machine on flat.
Fill the consumable into feed port when power off.
Wire (China)
Brown
Blue
Green/Yellow
Wire (Europe)
Brown
Blue
Green/Yellow
- 6 -
Wire (U.S.)
Black
White
Green/Yellow