djpower V-4 사용자 설명서 - 페이지 8
{카테고리_이름} djpower V-4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower V-4 17 페이지. Super spark machine
페이지 인쇄•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with
the rated voltage.
•
Turn on the machine, it will immediately start heating up.
5.2
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
5.3
On-device Control Mode & Operation
5.3.1
Programming
•
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. This
will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press "▲" or "▼" until the option
shows on the display. If there is another programming level, you will see that first option, or you will
see the selected value.
•
Press <MENU> repeatedly to switch menu pages.
•
Press <ENTER> to switch between current menu page and Standby Page at any time
5.3.2
Menu Map
Display
Heating Up
>>>>>>Temp. 200
Preparing
Page
Ready to Spark
Standby
>>>>>>Temp. 580
Page
Auto Heat-up
Manual
Mode
Pages
Button
<MENU>
▲
▼
<ENTER>
Description
The machine is heating up.
The machine could only start working when
reach the pre-set target temperature.
Finished heating up, ready to work.
Displays current heating system temperature.
Press <ENTER> to get back to this page at
any time (not DMX mode).
Press "▲" or "▼" to switch ON/OFF Auto
ON
Heat-up function.
The default setting of Auto Heat-up is ON. The Heat-up starts when the
machine is powered on. LCD will keep showing "Heating Up" until the
heating system reaches pre-set target temperature. When the LCD reads
"Ready to Spark", the machine is available for spark effect at the moment.
Function
Switch menu pages to select a function
Increases the numeric value of current function
Decreases the numeric value of current function
Switch between current menu page and Standby Page
- 7 -
Parameter
Range
550 -
630℃
ON/OFF