djpower XUN V-5 사용자 설명서 - 페이지 13
{카테고리_이름} djpower XUN V-5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower XUN V-5 17 페이지.
페이지 인쇄V-5 USER MANUAL
5.5.3
Manual Mode
Enter the advanced menu and set it to ON in the manual work setting interface. On the user menu page, there will be a
"spark test" interface, which can be used to manually set the switch to test spark effect.
6
SPARK SEED
Spark Seed is the consumable specially designed for DJPOWER Spark Machine, to create light golden color cold firework
for stage effect.
6.1
Identify & Activate Spark Seed
•
Swipe the Consumable ID card that come with the Spark Seed to identify
the consumables about to be filled into the fixture.
•
When the LCD on the fixture shows the information of the Spark Seed after
successfully swiping card, the identified Spark Seed could be filled into the
fixture.
•
Please keep the unscanned ID card and its associated spark seed. The ID
card that is successfully scanned and identified card will be invalid
immediately
Recharge instructions: Put the ID card in the scanning area of the machine to recharge, and the screen will
display the current recharge time when the recharge is complete.Each card can be recharged 30 times. The
ID card will automatically expire after the recharge is completed.
6.2
Fill in Spark Seed
Tear open the vacuum resealable foil pouch, and fill in the Spark Seed through the feed
port on the top of the fixture depending on the dosage needed.
Consumable Feed Port & Storage Bin
(Filling & Refilling Procedures)
•
Open the feed bin cap.
•
Fill the consumable into the feed port, NOT into the output nozzle
when power off.
•
Close the lid securely after filling.
•
The capacity of storage bin is 380g.
•
Only use DJPOWER consumable.
6.3
Spark Seed are stuck
•
Use a screwdriver to open the small cover on the
back of the machine.
•
Use the wrench to align the outer hexagon of the
right shaft and pull it up to clear the stuck.
6.4
Precaution for use
•
The Spark Seed could be only filled in and used for the DJPOWER Spark Machine after successfully identified by
swiping Consumable ID card.
•
Make sure to fill the Spark Seed through the feed port on the top of the fixture and when power supply is off.
12