djpower TOPCAT H-X3 DMX 사용자 설명서 - 페이지 10

{카테고리_이름} djpower TOPCAT H-X3 DMX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower TOPCAT H-X3 DMX 13 페이지. Automatic dry ice machine

Volume

Working

Status

100%

Page

Water Low

Error

Warning

Pages

Drain Valve

4.3

Manual Control Mode & Operation

There is a manual control button on the rear of the machine.

When the water temperature of the machine reaches 40 ℃,

the button LED will light up and the machine can work.

At this time, press the manual control button to run the unit,

and then press the button again to stop the fog output(pictured at right)

Note: The Manual control mode only works without connecting

to DMX signal.

4.4

DMX Mode & Operation

H-X3 DMX Automatic Dry Ice Machine works with a DMX controller.

• Connect the product to a suitable power outlet.

• Turn the product on.

• Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

Press ▲/ <VOLUME> to start the continuous setting.

Press ▲ and ▼ button to set the volume between 10% and

100%.

Press <ENTER> / <STOP> at any time to return to the

standby page.

Screen flashes;

Indicates current water level is too low. At this moment,

heater will not work.

Turn off the power, add water to the water level line and

restart the machine, return to the standby page, the

machine can work again.

Because the water will evaporate, only with enough water inside the unit, can it run continuously.

Screen flashes;

The temperature sensor is faulty.

Please turn off the power and contact the after-sales

service.

- 9 -

10% -100%