djpower TOPCAT H-X3 DMX Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Льодогенератор djpower TOPCAT H-X3 DMX. djpower TOPCAT H-X3 DMX 13 сторінок. Automatic dry ice machine
Друкувати сторінкуVolume
Working
Status
100%
Page
Water Low
Error
&
Warning
Pages
Drain Valve
4.3
Manual Control Mode & Operation
There is a manual control button on the rear of the machine.
When the water temperature of the machine reaches 40 ℃,
the button LED will light up and the machine can work.
At this time, press the manual control button to run the unit,
and then press the button again to stop the fog output(pictured at right)
Note: The Manual control mode only works without connecting
to DMX signal.
4.4
DMX Mode & Operation
H-X3 DMX Automatic Dry Ice Machine works with a DMX controller.
• Connect the product to a suitable power outlet.
• Turn the product on.
• Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
Press ▲/ <VOLUME> to start the continuous setting.
Press ▲ and ▼ button to set the volume between 10% and
100%.
Press <ENTER> / <STOP> at any time to return to the
standby page.
Screen flashes;
Indicates current water level is too low. At this moment,
heater will not work.
Turn off the power, add water to the water level line and
restart the machine, return to the standby page, the
machine can work again.
Because the water will evaporate, only with enough water inside the unit, can it run continuously.
Screen flashes;
The temperature sensor is faulty.
Please turn off the power and contact the after-sales
service.
- 9 -
10% -100%