3Jtech HSPA FWT WiFi AP 빠른 설정 매뉴얼

{카테고리_이름} 3Jtech HSPA FWT WiFi AP에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Jtech HSPA FWT WiFi AP 4 페이지.

Ver 1.0.0.3

Quick Setup Guide for HSPA FWT WiFi AP

1. HSPA FWT WiFi AP Packing List :

Before you start installing the HSPA FWT WiFi AP, please verify that the package contains the

following items:

One Set of HSPA FWT WiFi AP,

1x RJ45 Network Cable,

External 3G Antenna with 3M Antenna Cable,

RJ11 Phone Cable,

1x Power Adapter,

CD with User's Manual,

This Quick Setup Guide

NOTE: Please notify your sales representative immediately if any items listed above is missing or damaged.

2. Hardware Connection Settings

1) Connect PC to LAN port of your HSPA FWT WiFi AP using a RJ-45 cable.

2) Make sure the SIM card has inserted to the modem, and the modem is ready as well.

3) Connect the power cable to the power connector of your HSPA FWT WiFi AP.

4) For using the Fixed Wireless Terminal (FWT) function, connect an analog phone to the

PHONE port of your HSPA FWT WiFi AP using a RJ-11 cable.

Fig.1 The Connection of HSPA FWT WiFi AP

Since 1988