3Jtech HSPA FWT WiFi AP 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} 3Jtech HSPA FWT WiFi AP에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Jtech HSPA FWT WiFi AP 4 페이지.

Ver 1.0.0.3

4. Software Connection Settings

Refer to the following sections to set up the HSPA FWT WiFi AP. Before the setup, please

confirm that the LAN port of the AP has been connected with the PC via RJ-45:

Set up 3G Settings for the HSPA FWT WiFi AP

Please connect your computer to the HSPA FWT WiFi AP's LAN port.

Initiate your Internet Explorer, and type in the address "10.10.10.254"

Please input "admin" as the user name and the password. Click OK button to enter

AP's setup page.

Once you are in the setup page, please select "Internet Settings" and enter "WAN"

section of the setup.

In 2G/3G ISP SETTINGS, please contact your ISP for the dialup settings. User must

enter Access Point Name (APN), Dial Number, Username and Password. Besides,

you must enter PIN code if you had set up before for the SIM card.

Since 1988

Please ask your ISP for

required information