DK-TEC SPCPR150 사용자 설명서 - 페이지 8

{카테고리_이름} DK-TEC SPCPR150에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK-TEC SPCPR150 12 페이지. 15 hp wood chipper with electric start

01/2020

Before starting the engine, check that the bolts holding the inlet and outlet pipes are fully

tightened. (Fig. 12, 13)

4. Transportation

Before moving the machine, the engine must be switched off!

Maintenance and inspection

All technical inspections and maintenance must be carried out with the engine off and the spark

plug cap removed from the spark plug.

When cleaning the chipper, never spray the bearings with a high-pressure cleaner! This may

cause water to enter the bearings which will cause damage to the machine (This is not covered by

the warranty). The two grease nipples on the rotor must be lubricated once a year or every 500

hours.

Before the chipper must be packed away for seasonal storage, you must grease or oil it

blades and rotor to protect against corrosion.