Artist Guitars TL DIY KIT 매뉴얼 - 페이지 9

{카테고리_이름} Artist Guitars TL DIY KIT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artist Guitars TL DIY KIT 14 페이지.

TL DIY KIT MANUAL

Gently thread the cable on the potentiometers lead through the hole behind

the tone control cavity to the separate routing for the jack socket. Connect

the connector wire to the connector on the jack socket (they only ﬁt one way

round), then ﬁt the jack socket plate and secure it with dome-head screws.

Now position the pickguard, bridge, and control panel on the front of the

body in a way that the pickups and all the wiring sit neatly in the routed

cavities. Ensure that the edge of the pickguard sits snugly at the end of the

neck and straight to the bridge assembly. Secure the pickguard with the

small dome- head screws provided into the pre-drilled pilot holes.