DK2 Power OPC504 조립 설명서 - 페이지 8

{카테고리_이름} DK2 Power OPC504에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPC504 14 페이지. 4 and 6 inch commercial chipper

STEP 7: INSTALL FEED CHUTE

1. Install the feed chute on the 2 hinges. To seat the hinge pins

for the first time a rubber mallet may be used to tap the

pins into the hinges. These are tight fitting to reduce

vibration noise.

2. Close the Chute and latch it.

3. Plug the safety key shut off wire connectors together.

CONNECT WIRING CONNECTORS