DK2 Power OPG777 조립 설명서 - 페이지 12

{카테고리_이름} DK2 Power OPG777에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DK2 Power OPG777 16 페이지. Stump grinder

페이지 인쇄
DK2 Power OPG777 조립 설명서

ADJUSTING THE DRIVE BELTS

• POWER LOSS AT CUTTER WHEEL

•
CHECK YOUR BELT TENSION – SLIPPING BELTS CAUSE POWER LOSS.
•
WORN BELTS - REPLACE
•
BELT TENSION SHOULD BE SET AT .25 INCH MOVEMENT ABOVE AND
BELOW BELT NORMAL POSITION.
•
CHECK YOUR 4 ENGINE MOUNTING BOLTS, LOOSE ENGINE BOLTS WILL
CREATE LOOSE BELT TENSION.
LOOSEN 4 ENGINE
MOUNTING BOLTS
ADJUST BOLTS TO MOVE
THE ENGINE - CHANGING
TENSION ON BELTS.
USE DK2 POWER OEM REPLACEMENT BELTS FOR TOP PERFORMANCE
REMOVE 4 COVER
BOLTS AND REMOVE
BELT COVER
12