DK2 Power OPG777 Manual de montagem - Página 12
Procurar online ou descarregar pdf Manual de montagem para Moedor DK2 Power OPG777. DK2 Power OPG777 16 páginas. Stump grinder
Imprimir página
ADJUSTING THE DRIVE BELTS
• POWER LOSS AT CUTTER WHEEL
•
CHECK YOUR BELT TENSION – SLIPPING BELTS CAUSE POWER LOSS.
•
WORN BELTS - REPLACE
•
BELT TENSION SHOULD BE SET AT .25 INCH MOVEMENT ABOVE AND
BELOW BELT NORMAL POSITION.
•
CHECK YOUR 4 ENGINE MOUNTING BOLTS, LOOSE ENGINE BOLTS WILL
CREATE LOOSE BELT TENSION.
LOOSEN 4 ENGINE
MOUNTING BOLTS
ADJUST BOLTS TO MOVE
THE ENGINE - CHANGING
TENSION ON BELTS.
USE DK2 POWER OEM REPLACEMENT BELTS FOR TOP PERFORMANCE
REMOVE 4 COVER
BOLTS AND REMOVE
BELT COVER
12