AINA PTT Voice Responder 빠른 매뉴얼 - 페이지 2

{카테고리_이름} AINA PTT Voice Responder에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AINA PTT Voice Responder 4 페이지. Connecting to zello
AINA PTT Voice Responder에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (2 페이지), 장치 페어링 빠른 설명서 (5 페이지)

Putting your PTT Voice Responder into

Kodiak-mode

Turn on the device by pressing the Power button

Then, perform a software reset by pressing and holding both soft (arrow)

buttons and both PTT buttons simultaneously, until the LED blinks once in

yellow (this step is necessary to remove any previous pairings and settings).

Turn off the device by pressing the Power button

Activate Kodiak-mode by holding down the Volume-down button, while

turning on the device by pressing the Power button for more than 3 seconds.

Successful activation is indicated by an orange LED indication instead of the

normal power on LED.

Finally, put the Voice Responder into Storage mode, by pressing the Power and

Emergency button simultaneously; after the beep, first release the Power

button and then the Emergency button. Afterwards, you can turn on your

device from the Power button as usual.

Step 2. Software reset

for more than 3 seconds.

Step 4. Toggle Kodiak-mode