AINA PTT Voice Responder 빠른 매뉴얼 - 페이지 3

{카테고리_이름} AINA PTT Voice Responder에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AINA PTT Voice Responder 4 페이지. Connecting to zello
AINA PTT Voice Responder에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 매뉴얼 (2 페이지), 장치 페어링 빠른 설명서 (5 페이지)

Pairing your PTT Voice Responder to

your iPhone via Bluetooth

Turn on your PTT Voice Responder by holding down the Power button

more than 3 seconds. After it is on, a blinking green light will indicate that the

device is ready for pairing.

Turn on your iPhone's Bluetooth by going to: Settings —> Bluetooth —> Turn

on.

Pair your PTT Voice Responder to your iPhone by selecting it from the Devices

list. When the device is in Kodiak-mode, it will appear as 'Kodiak-PTT' on the

Bluetooth menu. Once it has successfully paired, a blue light will begin

blinking on your device.

Once you pair your PTT Voice Responder, another Kodiak-PTT will appear on

the Bluetooth Devices list. You will have to pair to this one as well, by (4.1)

selecting it, and (4.2) accepting the Bluetooth Pairing Request.

You are ready to use your PTT Voice Responder when you see two 'Kodiak-PTT'

devices connected on the Bluetooth menu.

NOTE: The Voice Responder can only be paired with one

device at a time. If you want to pair it to another device

you need to perform an Unpairing/ Software reset by

pressing and holding both soft buttons and both PTT

buttons simultaneously, until the LED blinks once in

yellow.

4.1.

4.2.

for