Artistic Licence netLynx quad 사용자 설명서 - 페이지 7
{카테고리_이름} Artistic Licence netLynx quad에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artistic Licence netLynx quad 12 페이지.
페이지 인쇄
DMX-Workshop
DMX-Workshop™ is a fully featured network
management, analysis, configuration and
diagnostics tool for lighting networks. You can
download the free software from our website.
When netLynx quad is connected to a computer
running DMX-Workshop, it should be detected
and displayed as an Art-Net node (click the
'Node List' tab to verify this). The node can be
expanded to show the configuration and DMX
output information, as shown below.
Figure: netLynx quad as viewed in DMX-Workshop
IP Address Configuration
Choosing the 'Configure IP Address' in the 'Advanced'
menu brings up a window that shows the IP and Subnet
Mask.
The IP uniquely identifies any nodes or controllers on a
network, while the Subnet Mask defines which part of
the IP represents the network address and which part
represents the node address. For example, a Subnet Mask
of 255.0.0.0 means that the first byte of the IP defines the
network address and the remaining 3 bytes define the Node
address.
By default, the product has a static IP address in the range
2.x.x.x. There are situations in which the user may wish
to change this - for example, a 192.168.x.x address is
generally used in office environments.
A useful additional feature is the ability to enable automatic
IP address allocation on networks controlled by a DHCP
server (check the 'Enable DHCP' box to activate).
netLynx quad User Guide
Squawk
On a complicated network it is not always
easy to relate what is showing on screen to
the physical location of the nodes. A single
press of the factory reset button on artLynx
quad causes the product to send a message
over the network to the console.
Right-clicking on any entry
brings up a menu that offers
various functionality:
The 'Configure Node' option
y
enables configuration of
the universe number (port
address), protocol (Art-Net
or sACN), sACN priority,
failover
name and port labels.
'Copy to clipboard' enables
y
all the node information to
be pasted into a support
request email.
'Merge
y
(selectable
individual DMX outputs)
enables the choice of LTP
(latest takes preference)
or HTP (highest takes
preference) merge modes.
'Indicators'
y
selection
identify or mute for the LED
indicators. Normal is the
default behaviour, identify
causes the power LED to
flash, and mute turns off all
the LEDs.
'RDM
y
options for device discovery
and configuration.
'Advanced'
y
'Programme Upload' and
'Configure
and DHCP' as described
opposite.
mode,
product
Controls'
only
on
enables
of
normal,
Devices'
offers
leads
to
IP
Address
Page 7
Page 7