Artistic Licence netLynx quad 사용자 설명서 - 페이지 8

{카테고리_이름} Artistic Licence netLynx quad에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artistic Licence netLynx quad 12 페이지.

Merging

netLynx quad is able to merge two streams of data to a DMX output. Depending on the settings,

merge can operate as HTP/LTP or Priority.

In HTP (highest takes precedence), the levels of each channel in the two streams are compared

and the highest value is used.

In LTP (latest takes precedence), the levels of each channel in the two streams is compared to

the output; if there is a change, that level is output.

In Priority, the sACN Priority field defines which universe will be output.

Art-Net

If two streams from different IP addresses are directed to the same Port-Address, merging will

occur. If more streams are directed to the same Port-Address, they will be ignored.

sACN

Merging can operate with both unicast and multicast data.

If two streams from different IP addresses are directed to the same universe, the priority field

is checked and the stream with the highest priority is output. If the priority field in both streams

is identical, merging will occur.

If additional stream(s) are directed to the same universe, any additional stream with higher

priority will take precedence. If the priority is identical to the merging streams, it will be ignored.

DMX Input

A DMX input can be merged with an Art-Net stream, an sACN stream or another DMX input.

The table below summarises the merging operation.

Please refer to Application Note "0130 Gateway merging" for details:

https://artisticlicence.com/application-notes/

Table: Merging operation

netLynx quad User Guide

Page 8