CustomCrimp HS-300 매뉴얼 - 페이지 4

{카테고리_이름} CustomCrimp HS-300에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CustomCrimp HS-300 13 페이지. Hose saw

Change Saw Blade

Remove the 5 screws holding the Side cover in place and

remove the side cover.

Remove the 2 No 10-24 screws holding the black Saw

Blade Access Panel in place and remove the insert in

order to provide clearance to remove the blade.

Hold the arbor in place with a wrench and remove the nut

holding the saw blade. There are wrench ﬂ ats on the arbor

behind the blade. (Note that this is a left handed nut).

When replacing a blade, if the blade has a rotation arrow,

make certain that the blade is mounted so that it rotates

in the direction of the arrow.

Replace the Saw Blade Access Panel insert and the Side

Cover.

DO NOT OPERATE THE SAW WITHOUT

ALL OF THE GUARDS IN PLACE