CustomCrimp HS-300 매뉴얼 - 페이지 6

{카테고리_이름} CustomCrimp HS-300에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CustomCrimp HS-300 13 페이지. Hose saw

Installation and Set Up

of the HS-300 / HS-500 Mister Kit

Full Assembly

P/N: 103172

The following procedures can be used to install the Mister Kit on the HS 300 and HS 500

models of Custom Crimp

Hose Saws.

Remove the HS-300 / HS-500 Mister Kit from its packaging and verify that all components are

properly installed and all ﬁ ttings are securely tightened as shown above, and then follow the

steps below to install the Mister Kit Lubricator.

Step 1.

Unplug hose saw. Remove the bolts and black cover from the Hose Mister Access (A).

Step 2.

Insert the Hose Manifold Mister into the Hose Mister Access, and secure it with the 1/4 - 20

x 3/4" Hex Bolts provided (B).

Step 3.

Remove the Fill Plug located on the top of the Mister Lubricator (C).