Artistry AQUABRASION 매뉴얼 - 페이지 3

{카테고리_이름} Artistry AQUABRASION에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artistry AQUABRASION 10 페이지. Skincare device

Device Structure

Power Button

Before Use: Charge the Device with USB-C Cable provided. Charging time can vary by country and outlet.

How To Charge

1. Ensure Tanks are empty. Securely place the Device upright in the

Cradle.

2. Use the USB-C Cable provided to charge the Device*

3. A red light will be displayed around the POWER Button while

charging. When the Device is fully charged, the light will turn

green.

4. When charging is complete, unplug. The Device will not operate

while plugged in.

* 5V adapter is required (not included).

Do not use a quick/fast USB adapter.

Low Battery Indicator

When the battery Power is less than 5%, the Device will beep several times and a red light will blink around the

POWER Button. The Device will not work. Follow the steps above to charge the Device.

Turning the Device On/Off and Changing Modes/Levels

• To turn the Device on, press the POWER Button. A white light will indicate the Device is on.

• To select the appropriate Suction level, press the POWER Button again for Level 1;

press twice for Level 2; press three times for Level 3.

• To select SERUM Mode, press the SERUM Button once the Device is on.

• To turn the Device off, press and hold the POWER Button for 2 seconds.

NOTE: You may turn the Device off whenever necessary or desired.

SERUM Dome Attachment

SERUM Button

Water Drain Hole

Charging Port

Water Tank

Water Supply Tube

Suction Nozzle

Level Sensor

Waste Tank

Bottom Cap