ArtiVisuals Mix-iT.ATEM 사용자 설명서 - 페이지 13

{카테고리_이름} ArtiVisuals Mix-iT.ATEM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtiVisuals Mix-iT.ATEM 15 페이지. Mix-it series compact control panel for blackmagic design atem switchers

페이지 인쇄

Update firmware

The current version of the firmware can be checked in the Mix-iT with rotary 1 - IP config

menu, entry 8 - version info, this shows the ATEM fw version and Mix-iT fw version.

The Mix-iT firmware can be updated via Ethernet. First you need to download a zip-file

containing the firmware file together with the update tool for your PC or Mac from the

Mix-iT website - suport.



Before continuing, note down the ip-address of the Mix-iT.



Install the software on the PC or Mac



Double click the 'updater' icon



Be sure that the PC is in the same subnet as the Mix-iT



Now enter the IP-address of the Mix-iT in the uploader tool.



In the Mix-iT, enable updating in the IP config menu (rotary 1), entry 9 - Update

firmwre, OK



Powercycle the Mix-iT as indicated



Display should show no text



(If you powercycle the unit once again, it resumes normal operation)



Now press 'connect' in the update tool



If the update tool is able to establish a connection, it shows 'Connected'



You now have 8 seconds to click 'send' in the update tool, after that the Mix-iT wil

restart.



If send is clicked in time, the firmware transfer is started.



When the transfer is done, it shows 'upload finished, disconnected', and the Mix-

iT restarts



Powercycle the Mix-iT

You have now completed the firmware transfer. You can check the firmware version with

rotary 1, entry 8 - version info.

User Guide Mix-iT for ATEM v2.0

- 13 -