ArtiVisuals Mix-iT.ATEM 사용자 설명서 - 페이지 12

{카테고리_이름} ArtiVisuals Mix-iT.ATEM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtiVisuals Mix-iT.ATEM 15 페이지. Mix-it series compact control panel for blackmagic design atem switchers

페이지 인쇄

Aux menu

The aux menu is entered by pressing rotary 3.

Auxiliaries are extra outputs on the switcher, that can have all sources directed to them.

The number of aux-outputs depends on the ATEM model. The Television studio has

none, a 2 ME switcher has six auxes.

Clicking rotary 3 once lets you select the aux output, clicking once more lets you choose

the source you want to send to this AUX output.

For example AUX1 - Camera 4

After selecting the output you return to the status display.

Macros

Version 2 of the Mix-iT firmware adds support for Macros, the ATEM switcher needs

Blackmagic software 6.3 or higher to run macros. Macros let you automate a sequence

of switcher actions that can be recalled with the press of a button.

Some examples of macros:

- select a program input

- select a transition and/or transition speed

- switch to an input, which is chroma-keyed, with adjusting the key-settings

- send the program signal to aux3

- switch a supersource input

The recording of macros is done in the macros window of the ATEM software on your

PC or Mac, macros are stored in non-volatile memory the switcher.

To recall a macro, Mix-iT offers two options:

1. Use buttons Key1-4: Each of these buttons can be set to either operate the upstream

keyer, or run a selected macro in the range 1-99. Convenient if you need quick access to

a few macro's

2. Use player controls: The rotary and play button are used to select and control macros.

With the rotary you select a macro in a range of 1-99, indicated in the LCD. The play

button is used to start and stop the macro. When the macro has a user-input event, the

play button resumes the macro. By at the same time pressing the rotary and the play-

button, the macro is played in a loop.

For more information on macros, please consult the Blackmagic ATEM operation

manual, 'using macros'.

User Guide Mix-iT for ATEM v2.0

- 12 -