ArtiVisuals Mix-iT.ATEM 사용자 설명서 - 페이지 10

{카테고리_이름} ArtiVisuals Mix-iT.ATEM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtiVisuals Mix-iT.ATEM 15 페이지. Mix-it series compact control panel for blackmagic design atem switchers

페이지 인쇄

Button map menu

By clicking rotary 2, you enter the button menu. In this menu, you can tailor the Mix-iT to

your needs.

1. Map busses

Here you can select Preview /program (which is standard) or swap the preview

and program bus.

If you use the Mix-iT with a 2 M/E ATEM switcher, you must choose if you want

to control M/E one or two. By using an extra Mix-iT, you can control both ME's at

the same time.

The custom entry allows you to connect each bus to preview, program or one of

the aux outputs.

Finally return brings you back to the button menu.

2. Map Buttons

When you select default, this resets the mapping:

Buttons 1 to 8 are connected to inputs 1 to 8, buttons 9 and 10 control the

mediaplayers, and 'col' is used to select the colors.

SDI first arranges the inputs in such a way, that SDI signals start from switch 1.

This relates to the model of the ATEM switcher.

When you select custom, you can fully customize the link between sources and

buttons. Buttons 1 to 11 can be individually connected to the available sources in

the mixer, but you can also disable a button. Selecting button 0 returns you to the

button menu.

The entry 'key 1-4' is for setting the function of these buttons. By default they are

used to select upstream keyers 1 to 4, but each button can be changed to start a

macro instead. Macro's are recorded in the ATEM control software for PC and

Mac, and are stored in the switcher.

User Guide Mix-iT for ATEM v2.0

- 10 -