ArtiVisuals Mix-iT.ATEM Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування ArtiVisuals Mix-iT.ATEM. ArtiVisuals Mix-iT.ATEM 15 сторінок. Mix-it series compact control panel for blackmagic design atem switchers
Друкувати сторінкуButton map menu
By clicking rotary 2, you enter the button menu. In this menu, you can tailor the Mix-iT to
your needs.
1. Map busses
Here you can select Preview /program (which is standard) or swap the preview
and program bus.
If you use the Mix-iT with a 2 M/E ATEM switcher, you must choose if you want
to control M/E one or two. By using an extra Mix-iT, you can control both ME's at
the same time.
The custom entry allows you to connect each bus to preview, program or one of
the aux outputs.
Finally return brings you back to the button menu.
2. Map Buttons
When you select default, this resets the mapping:
Buttons 1 to 8 are connected to inputs 1 to 8, buttons 9 and 10 control the
mediaplayers, and 'col' is used to select the colors.
SDI first arranges the inputs in such a way, that SDI signals start from switch 1.
This relates to the model of the ATEM switcher.
When you select custom, you can fully customize the link between sources and
buttons. Buttons 1 to 11 can be individually connected to the available sources in
the mixer, but you can also disable a button. Selecting button 0 returns you to the
button menu.
The entry 'key 1-4' is for setting the function of these buttons. By default they are
used to select upstream keyers 1 to 4, but each button can be changed to start a
macro instead. Macro's are recorded in the ATEM control software for PC and
Mac, and are stored in the switcher.
User Guide Mix-iT for ATEM v2.0
- 10 -