ArtiVisuals Mix-iT.ATEM Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування ArtiVisuals Mix-iT.ATEM. ArtiVisuals Mix-iT.ATEM 15 сторінок. Mix-it series compact control panel for blackmagic design atem switchers
Друкувати сторінку3. Player controls.
This sets the function of the player rotary and key. These can be used to control
the option port, macro's, or a hyperdeck player or recorder
We will explain this a bit more:
The option port is used to connect external hardware, such as the RS485-KBD
interface which controls a Mac running Softron On Air Video Express.
When you select macros, the rotary is used to select a macro, and the play
button is used for start, stop and continue. If you press the rotary and the play
button at the same time, the selected macro is played in a loop.
A Blackmagic Hyperdeck can be controlled either as a recorder or as a player
from the Mix-iT. After you select this, the IP-address of the Hyperdeck has to be
entered.
Mix-iT connects to the Hyperdeck at startup, the player key lights up green briefly
if this is succesfull, and red if not.
In play mode, use the rotary to jump to clips. Pressing the rotary once let's you
jog the selected clip. Use the Play button to start and stop the clip.
When you select Hyperdeck recorder, you start or stop recording by pressing
both the key and the rotary. The key lights up red when recording.
Return gets you back to the button menu
4. Shift key Enable.
This option is convenient if you use more than 10 video inputs. It changes the col
button into a shift button, enabling a total of 20 inputs. Inputs 11 to 20 are
selected by -at the same time - pressing shift and key 1-10
5. Player start
This entry entry lets you link the starting of a clip to an input. Here is how this
works:
If you selected 'Hyperdeck play' or 'option port' in the player controls entry,
pressing the play button now cues the selected clip, but it doesn't start it yet. The
clip is started by switching the selected input live with the 'AUTO' or 'CUT' button,
or by directly selecting it in the program bus. The clip can also be started by
pressing the player button once more. You can enter a start delay to compensate
for the player startup time.
6. DIM Leds in the button menu does just that - it enables you to adjust the brightness of
the led's in the switches to the light level of the environment.
7. Save & exit stores the settings you just made in non-volatile memory.
User Guide Mix-iT for ATEM v2.0
- 11 -