ArtiVisuals Mix-iT.ATEM User Manual - Page 11

Browse online or download pdf User Manual for Control Panel ArtiVisuals Mix-iT.ATEM. ArtiVisuals Mix-iT.ATEM 15 pages. Mix-it series compact control panel for blackmagic design atem switchers

Print Page

3. Player controls.

This sets the function of the player rotary and key. These can be used to control

the option port, macro's, or a hyperdeck player or recorder

We will explain this a bit more:

The option port is used to connect external hardware, such as the RS485-KBD

interface which controls a Mac running Softron On Air Video Express.

When you select macros, the rotary is used to select a macro, and the play

button is used for start, stop and continue. If you press the rotary and the play

button at the same time, the selected macro is played in a loop.

A Blackmagic Hyperdeck can be controlled either as a recorder or as a player

from the Mix-iT. After you select this, the IP-address of the Hyperdeck has to be

entered.

Mix-iT connects to the Hyperdeck at startup, the player key lights up green briefly

if this is succesfull, and red if not.

In play mode, use the rotary to jump to clips. Pressing the rotary once let's you

jog the selected clip. Use the Play button to start and stop the clip.

When you select Hyperdeck recorder, you start or stop recording by pressing

both the key and the rotary. The key lights up red when recording.

Return gets you back to the button menu

4. Shift key Enable.

This option is convenient if you use more than 10 video inputs. It changes the col

button into a shift button, enabling a total of 20 inputs. Inputs 11 to 20 are

selected by -at the same time - pressing shift and key 1-10

5. Player start

This entry entry lets you link the starting of a clip to an input. Here is how this

works:

If you selected 'Hyperdeck play' or 'option port' in the player controls entry,

pressing the play button now cues the selected clip, but it doesn't start it yet. The

clip is started by switching the selected input live with the 'AUTO' or 'CUT' button,

or by directly selecting it in the program bus. The clip can also be started by

pressing the player button once more. You can enter a start delay to compensate

for the player startup time.

6. DIM Leds in the button menu does just that - it enables you to adjust the brightness of

the led's in the switches to the light level of the environment.

7. Save & exit stores the settings you just made in non-volatile memory.

User Guide Mix-iT for ATEM v2.0

- 11 -