ArtiVisuals Mix-iT.ATEM Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування ArtiVisuals Mix-iT.ATEM. ArtiVisuals Mix-iT.ATEM 15 сторінок. Mix-it series compact control panel for blackmagic design atem switchers
Друкувати сторінку4. ATEM switcher
This is an important setting, if it is not correct there will be no connection between
Mix-iT and ATEM switcher. You can find the switcher address in the preferences
window of the ATEM control software for PC or Mac, or with the ATEM setup
utility via USB.
For more information on this topic see the Blackmagic ATEM operation manual -
getting started.
5. Gateway Address
This address is only used if the ATEM switcher and Mix-iT are not located in the
same subnet. The default value for the gateway address is 192.168.10.1
6. Save & Exit
This entry allows you to save the changed IP parameters. If you made any
changes, the Mix-iT will now restart, and connect, using the new parameters.
You may have to powercycle the panel. If you select cancel, changes will not be
stored.
7. Firmware update
To update the firmware, you can download the update utility for Mac or PC from
the website 'Mix-iT.tv'. Here you will also find instructions on how to proceed.
If you accidently selected to update the firmware, powercycling the Mix-iT twice
should bring you back in business.
8. Version info
This entry shows the version of the ATEM -firmware and the version of the Mix-it
firmware. If your ATEM firmware version is lower than 2.12, we advise you to
update the switcher via the USB connector with the ATEM setup utility.
9. MAC address
The MAC address is the unique hardware code for your Mix-IT, and is read-only.
Your network administrator may need it.
Note: If you push and hold down any rotary for 2 seconds, you will return to the status
display. Beware that all changes will be lost in that case.
User Guide Mix-iT for ATEM v2.0
- 9 -