ArtiVisuals Mix-iT.ATEM 사용자 설명서 - 페이지 9

{카테고리_이름} ArtiVisuals Mix-iT.ATEM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtiVisuals Mix-iT.ATEM 15 페이지. Mix-it series compact control panel for blackmagic design atem switchers

페이지 인쇄

4. ATEM switcher

This is an important setting, if it is not correct there will be no connection between

Mix-iT and ATEM switcher. You can find the switcher address in the preferences

window of the ATEM control software for PC or Mac, or with the ATEM setup

utility via USB.

For more information on this topic see the Blackmagic ATEM operation manual -

getting started.

5. Gateway Address

This address is only used if the ATEM switcher and Mix-iT are not located in the

same subnet. The default value for the gateway address is 192.168.10.1

6. Save & Exit

This entry allows you to save the changed IP parameters. If you made any

changes, the Mix-iT will now restart, and connect, using the new parameters.

You may have to powercycle the panel. If you select cancel, changes will not be

stored.

7. Firmware update

To update the firmware, you can download the update utility for Mac or PC from

the website 'Mix-iT.tv'. Here you will also find instructions on how to proceed.

If you accidently selected to update the firmware, powercycling the Mix-iT twice

should bring you back in business.

8. Version info

This entry shows the version of the ATEM -firmware and the version of the Mix-it

firmware. If your ATEM firmware version is lower than 2.12, we advise you to

update the switcher via the USB connector with the ATEM setup utility.

9. MAC address

The MAC address is the unique hardware code for your Mix-IT, and is read-only.

Your network administrator may need it.

Note: If you push and hold down any rotary for 2 seconds, you will return to the status

display. Beware that all changes will be lost in that case.

User Guide Mix-iT for ATEM v2.0

- 9 -