ArtiVisuals Mix-iT.ATEM 사용자 설명서 - 페이지 6

{카테고리_이름} ArtiVisuals Mix-iT.ATEM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ArtiVisuals Mix-iT.ATEM 15 페이지. Mix-it series compact control panel for blackmagic design atem switchers

페이지 인쇄

4. LCD panel

During normal operation, the first line of the LCD shows the model of the

connected switcher, and the second line shows a status line.

On this status line you find from left to right: the selected clip in mediaplayer 1, in

mediaplayer 2, the selected color, and optional the selected macro. These

selections correspond to rotaries 1 to 3, and optional 4: turning rotary 1 changes

the selected clip in mediaplayer 1 and so on.

5. Rotary 1 to 3

Rotary 1 to 3 are located directly above buttons 9, 10 and 'col' on the preview

and program bus. By default these buttons are used for selecting mediaplayer 1

and 2, and color.

6. Fader

To manually perform a transition from the source selected in the program bus to

the source in the preview bus. The transition effect is set in the ATEM software.

7. Downstream key buttons

To bring the downstream keyers on air. The downstream keyers are faded in and

out, the duration of this fade can be set in the Blackmagic ATEM software, and

can then be stored in the mixer.

8. Rotary 4

Can be used to control the option port (with Play button), macro's, or a

hyperdeck player or recorder. See menus.

9. Play button

Can be used to control the option port (with Rotary 4), macro's, or a

hyperdeck player or recorder. See menus.

10. Auto button

To run a transition automatically, the speed of the transition is set in the ATEM

software.

11. Cut button

To switch instant between preview and program bus.

For more information see the Blackmagic ATEM operation manual.

User Guide Mix-iT for ATEM v2.0

- 6 -