ArtiVisuals Mix-iT.ATEM Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Панель керування ArtiVisuals Mix-iT.ATEM. ArtiVisuals Mix-iT.ATEM 15 сторінок. Mix-it series compact control panel for blackmagic design atem switchers
Друкувати сторінку4. LCD panel
During normal operation, the first line of the LCD shows the model of the
connected switcher, and the second line shows a status line.
On this status line you find from left to right: the selected clip in mediaplayer 1, in
mediaplayer 2, the selected color, and optional the selected macro. These
selections correspond to rotaries 1 to 3, and optional 4: turning rotary 1 changes
the selected clip in mediaplayer 1 and so on.
5. Rotary 1 to 3
Rotary 1 to 3 are located directly above buttons 9, 10 and 'col' on the preview
and program bus. By default these buttons are used for selecting mediaplayer 1
and 2, and color.
6. Fader
To manually perform a transition from the source selected in the program bus to
the source in the preview bus. The transition effect is set in the ATEM software.
7. Downstream key buttons
To bring the downstream keyers on air. The downstream keyers are faded in and
out, the duration of this fade can be set in the Blackmagic ATEM software, and
can then be stored in the mixer.
8. Rotary 4
Can be used to control the option port (with Play button), macro's, or a
hyperdeck player or recorder. See menus.
9. Play button
Can be used to control the option port (with Rotary 4), macro's, or a
hyperdeck player or recorder. See menus.
10. Auto button
To run a transition automatically, the speed of the transition is set in the ATEM
software.
11. Cut button
To switch instant between preview and program bus.
For more information see the Blackmagic ATEM operation manual.
User Guide Mix-iT for ATEM v2.0
- 6 -