Alula RE657 매뉴얼 - 페이지 2

{카테고리_이름} Alula RE657에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE657 12 페이지. Connect+ encrypted

4. Enroll the Touchpad by pressing the enroll button on the side of the panel until

it beeps once and then selecting the desired panel on the Touchpad. Note, the

Touchpad will list all panels within range, not just the ones in enrollment mode. The

network "names" will include the last 4 digits of the MAC Address printed on the

panel label.

After selecting the desired panel, the Touchpad will progress through stages of

discovery and authentication. Upon success it will show the DISARMED screen. If

the wrong panel was selected then press the "Restart"button in the side menu.

Troubleshooting Steps if Enrollment Fails:

• Confirm the panel is in wireless enrollment mode. A red light will flash on the

panel if in wireless enrollment mode.

• Check whether the panel is already full. The limit is four Touchpads. To

confirm number of Touchpads connected, log into your account.

• Tap the "Restart" button to try again.

5. Finish mounting in the desired location. For tabletop mounting, slide the feet into

the tracks on the back of the Touchpad. The fit is intended to be quite snug, so

some force may be required for the feet to "click" into place.

6. Test the Touchpad by arming and disarming the panel from the Touchpad.