Alula RE218 빠른 시작 매뉴얼

{카테고리_이름} Alula RE218에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE218 2 페이지. Flood & temp sensor honeywell compatible

페이지 인쇄

Resolution Compatibles

Flood and Temp Sensor

sensor. It detects flood conditions and reports extreme

temperatures.

Features

• Titanium probes for unmatched corrosion immunity

• IP67 rated waterproof enclosure

• GORE

vent to prevent seal failure

• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode and

removing the battery tabs, tampering the sensor, or manually

entering the sensor ID.

Loop Configuration

• Loop 1 = Freeze

• Loop 2 = Heat

• Loop 3 = Flood

Install

by placing the sensor in the location requiring flood or

temperature detection. If desired, the wall clip can be used to

secure the sensor.

Optional Screw Mounting

• Remove the wall clip from the sensor's body.

• Secure the clip to a wall, baseboard or cupboard

using a #6 screw.

• Slide the sensor's body down onto the wall clip

until it snaps into place.

Detects

water pooled under the sensor and reports extreme

temperature conditions.

Temperature Trip Points

• Heat alarms when over 100°F (38°C)

• Heat restores when under 97°F (36°C)

• Freeze alarms when under 45°F (7°C)

• Freeze restores when over 48°F (9°C)

To replace the batteries,

the front slot and twist. Slide both old batteries out and the

new batteries in. To reinstall the cover, align the rear latches

and roll the cover forward until it snaps into place.

Verify proper enrollment and operation using your control panel's installation manual.

RE218 Flood & Temp Sensor

Honeywell

is an integrated environmental

insert a flat blade screwdriver into

Compatible

Wall Clip

Mounting Screw Hole

Front slot