Artopex e-Motion 사용자 설명서 - 페이지 6
{카테고리_이름} Artopex e-Motion에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artopex e-Motion 10 페이지. Two-leg adjustable table
페이지 인쇄
Settings
Setting buttons
"1" – Return to previous menu
"UP/DOWN" arrows – Menu select
"M" - Confirm
Menu
Units (1Un)
Screen Brightness (2Br)
Sound (3bE)
Upward Sensitivity (4Fu)
Downward Sensitivity (5Fd)
Vibration Sensitivity (6FS)
Lowest Height Display & Height Range (7SH)
Button Push Modes (8Hc)
Timer (9St)
Bounce Travel (10H)
Restore Factory Settings (11r)
Demo Mode (12d)
Units: Metric (cm) or Imperial (inches) - 1Un
Activate keypad by pressing any button. Press «M» button for 3 seconds, screen will display S--, then
release the «M» button and press the «up» arrow until code 1Un appears. Press «M» button to enter;
screen will display In (inches) by default. Press "M" button to preserve imperial (inches) display or press
the «Up/Down» button to switch to metric (cm) units so the screen displays SI. Press «M» button to
preserve the metric (cm) display.
Screen Brightness - 2br
Activate keypad by pressing any button. Press «M» button for 3 seconds, screen will display S--, then
release the «M» button and press the «up» arrow until code 2br appears. Press «M» button to enter.
Using the UP/DOWN buttons, toggle between l/n/h (low, normal or high brightness) and press the
«M» button to confirm selection.
Sound (''beep'') - 3bE
Activate keypad by pressing any button. Press «M» button for 3 seconds, screen will display S--, then
release the «M» button and press the «up» arrow until code 3be appears. Press «M» button to enter.
Using the UP/DOWN buttons, toggle between OFF/On and press the «M» button to confirm selection.
1 800 378-0189
6