Aluprof AM45-10/17-ER-P 프로그래밍 매뉴얼

{카테고리_이름} Aluprof AM45-10/17-ER-P에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof AM45-10/17-ER-P 8 페이지.
Aluprof AM45-10/17-ER-P에 대해서도 마찬가지입니다: 프로그래밍 매뉴얼 (9 페이지)

페이지 인쇄

PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES

1. TECHNICAL SPECIFICATIONS

Power supply:

Power consumption:

Limit swiches:

Operating temperature:

Protection degree:

Frequency:

Average range:

Reacts on the obstacles.

Works with all AC series transmitters included in the ALUPROF S.A. offer.

Ability of programming up to 20 transmitters. Each next transmitter will overwrite the last programmed one.

Company reserves the tolerance of catalog data due the different conditions usage.

2. ELECTRICAL CONNECTIONS

- Installation of the motor should be carried out by authorized persons.

- The motor is designed for use in dry rooms and should not be exposed

to direct weather conditions.

- The motor should be powered by a separate circuit and protected by a

quick fuse for example: circuit breaker type B10

We reserve the right to any technical change.

Valid on 2022.01.27

PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES

230 VAC / 50 Hz

135 W, 170 W, 200 W

Electronic

~ -10°C - ~ +60°C

IP44

433.92 MHz

80 meters (in open space), 20 meters (inside buildings)

230V / 50Hz

NOTE

For the obstacle response system to work properly:

- security springs WB or WL&P, W OCTOEASY must be used,

- side locks or stoppers in the endslat must be used,,

- adjust the maxiumum torque of the motor (Nm) to the weight of the

curtain,,

- upper and lower limit position sholud be set up