Aluprof AC 277-01 프로그래밍 매뉴얼 - 페이지 6
{카테고리_이름} Aluprof AC 277-01에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof AC 277-01 8 페이지.
페이지 인쇄
12. OPERATING MODES
I
Set switch 3 and 4
to the "ON" position.
II
Set switch 4 to the
"ON" position.
III
Set switch 3 to the
"ON" position.
IV
Set switch to the
"OFF" position.
Mode III and IV requires protections to be connected.
6
PROGRAMMING MANUAL FOR THE AC 277-01 CONTROL UNIT
Press the "TOP" or "DOWN"
button to switch motor to
impulse mod.
Press the "TOP" button
to run the motor
continuously.
Press the "TOP" or
"DOWN" button to run the
motor continuously.
Press the "TOP" or "DOWN"
button to run the motor
continuously.
Press the "DOWN"
button to switch
motor to impulse mod.
After protection is triggered the
direction of the motor
changes. (UP).
After protection is triggered the
direction of the motor
changes. (UP).
After the motor has stopped,
the countdown of the time after
which it will close automatically
(point 9.).
We reserve the right to any technical change.
Valid on 2021.06.07