Aluprof AC 277-01 프로그래밍 매뉴얼 - 페이지 7

{카테고리_이름} Aluprof AC 277-01에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof AC 277-01 8 페이지.

13. ERASING ONE TRANSMITTER.

DIRECTIONAL

With the control unit

powered on, press

the "Learn" button.

IMPULSE

With the control unit powered on

lift and stop garage door in

the top position.

The transmitter has been

deleted.

"Learn" mode after 10 seconds of inactivity will close and no changes will be saved.

14. ERASING ALL OF THE TRANSMITTERS.

With the control unit

powered on, press

and hold the "Learn"

button.

We reserve the right to any technical change.

Valid on 2021.06.07

PROGRAMMING MANUAL FOR THE AC 277-01 CONTROL UNIT

The green LED

will flash slowly.

Press the "Learn" button

The green LED will

flash rapidly. Release the

button.

Press the "DOWN" button on

the transmitter. The green LED

will quickly flash 3 times.

The green LED will

flash slowly.

Press the Learn button

again. The green

LED will turn off.

The transmitter has been

deleted.

Press the button on the

transmitter. The green LED

will quickly flash 3 times.

The transmitters have been

deleted.