Cutting Edge SOLAR TRAILER 조립 및 작동 매뉴얼 - 페이지 9

{카테고리_이름} Cutting Edge SOLAR TRAILER에 대한 조립 및 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cutting Edge SOLAR TRAILER 10 페이지.

12. Attach the wind turbine to the flange adapter first. The hardware is shown below:

13. Run the wire through the pipe and out the bottom of the welded foot on the trailer. Connect the 3

wires to the 3 wires on the solar generator. It doesn't matter which color connects to which wire—3 phase

AC does not have polarity or hot/neutral designations.

14. Now you can attach the blades to the hub and the hub to the wind turbine. Make sure to tighten down

the flange adapter set screws. If equipped with a brake switch, switch the wind turbine input to "run" for

charging, "off" for connecting and disconnecting, or "brake" for high wind conditions to avoid damaging the

turbine.

Solar Trailer Assembly and Operation Manual