Cutting Edge SOLAR TRAILER Руководство по сборке и эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Инвертор Cutting Edge SOLAR TRAILER. Cutting Edge SOLAR TRAILER 10 страниц.

Cutting Edge SOLAR TRAILER Руководство по сборке и эксплуатации
12. Attach the wind turbine to the flange adapter first. The hardware is shown below:
13. Run the wire through the pipe and out the bottom of the welded foot on the trailer. Connect the 3
wires to the 3 wires on the solar generator. It doesn't matter which color connects to which wire—3 phase
AC does not have polarity or hot/neutral designations.
14. Now you can attach the blades to the hub and the hub to the wind turbine. Make sure to tighten down
the flange adapter set screws. If equipped with a brake switch, switch the wind turbine input to "run" for
charging, "off" for connecting and disconnecting, or "brake" for high wind conditions to avoid damaging the
turbine.
Solar Trailer Assembly and Operation Manual