ARTRED AR50 운영 매뉴얼 - 페이지 7
{카테고리_이름} ARTRED AR50에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTRED AR50 12 페이지.
페이지 인쇄wet cloth should be used to wipe all parts of the equipment.
13. The maintenance and repair of this equipment must be carried out by professional
personnel.
3.0 Notes for First Use
For the first use of new machine, please follow the below
procedures:
Carefully open the package to prevent damage to the machine in the
1.
process of opening. Carefully remove the machine from the packing box
and check whether the random parts are complete.
After carefully reading this "Instructions for Use" and keeping in mind
2.
the essentials of operation and matters needing attention, the following
should be done:(The machine can be operated only on the basis of full
understanding.)
Connect the suction pick-up with the suction pick-up rack, tighten the
3.
two fixed handles after adjusting the position, and connect the suction
pipe mouth with the joint on the machine.
Remove the brush disc and choose the appropriate brush disc or
4.
cleaning pad according to your ground condition for installation.
Water is injected into the water tank.
5.
Install the brush disc and put down the suction pickle and brush disc.
6.
7.Start the suction motor, brush disc motor and solenoid valve.
8.Pull the valve switch handle to adjust the appropriate water output.
9.Open the advance switch and step on the throttle to clean.
After cleaning, first close the brush disc motor, then close the water
10.
absorption motor.
Rise the brush disc and suction pickle to drain the sewage. If you
11.
have finished the day's work, please clean and maintain the machine as
- 6 -