ARTRED AR50 Kullanım Kılavuzu - Sayfa 7

Yıkayıcı ARTRED AR50 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ARTRED AR50 12 sayfaları.

wet cloth should be used to wipe all parts of the equipment.

13. The maintenance and repair of this equipment must be carried out by professional

personnel.

3.0 Notes for First Use

For the first use of new machine, please follow the below

procedures:

Carefully open the package to prevent damage to the machine in the

process of opening. Carefully remove the machine from the packing box

and check whether the random parts are complete.

After carefully reading this "Instructions for Use" and keeping in mind

the essentials of operation and matters needing attention, the following

should be done:(The machine can be operated only on the basis of full

understanding.)

Connect the suction pick-up with the suction pick-up rack, tighten the

two fixed handles after adjusting the position, and connect the suction

pipe mouth with the joint on the machine.

Remove the brush disc and choose the appropriate brush disc or

cleaning pad according to your ground condition for installation.

Water is injected into the water tank.

Install the brush disc and put down the suction pickle and brush disc.

7.Start the suction motor, brush disc motor and solenoid valve.

8.Pull the valve switch handle to adjust the appropriate water output.

9.Open the advance switch and step on the throttle to clean.

After cleaning, first close the brush disc motor, then close the water

10.

absorption motor.

Rise the brush disc and suction pickle to drain the sewage. If you

11.

have finished the day's work, please clean and maintain the machine as

- 6 -