CVS Controls 630 HP 사용 설명서 - 페이지 6

{카테고리_이름} CVS Controls 630 HP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CVS Controls 630 HP 20 페이지. Regulators and relief valves

9. To ensure proper slack in the diaphragm:

9.1 For constructions using a spring, tighten the

spring case cap screws finger tight only.

Compress the spring slightly with the

adjusting screw (or cap screw for pressure

loaded constructions); then complete the

tightening of spring case cap screws and

nuts.

9.2 For constructions without a spring, tighten

spring case cap screws finger tight only.

Remove cap screw (Key 23). Insert a rod in

the spring case and push on the assembly to

take up the slack; then complete the

tightening of the spring case cap screws.

Re-install cap screw (Key 23) in spring case.

Nameplate Information

When corresponding with your CVS Controls

representative about this device, state the model

number, pressure range and all other pertinent

information found on the nameplate (Key 29).

When ordering replacement parts, also specify the

complete part number of each part required.