CVS Controls 630 HP Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Controller CVS Controls 630 HP. CVS Controls 630 HP 20 pages. Regulators and relief valves

Print Page

9. To ensure proper slack in the diaphragm:

9.1 For constructions using a spring, tighten the

spring case cap screws finger tight only.

Compress the spring slightly with the

adjusting screw (or cap screw for pressure

loaded constructions); then complete the

tightening of spring case cap screws and

nuts.

9.2 For constructions without a spring, tighten

spring case cap screws finger tight only.

Remove cap screw (Key 23). Insert a rod in

the spring case and push on the assembly to

take up the slack; then complete the

tightening of the spring case cap screws.

Re-install cap screw (Key 23) in spring case.

Nameplate Information

When corresponding with your CVS Controls

representative about this device, state the model

number, pressure range and all other pertinent

information found on the nameplate (Key 29).

When ordering replacement parts, also specify the

complete part number of each part required.