ALUZ ZUCO Standard BIOS Illuminated 설치 지침 매뉴얼 - 페이지 11
{카테고리_이름} ALUZ ZUCO Standard BIOS Illuminated에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALUZ ZUCO Standard BIOS Illuminated 11 페이지.
페이지 인쇄SURGE PROTECTOR SPECIFICATIONS
Model
Input Voltage
Surge Protection Level
ALS-P
120V - 277V
0kV, 10kA, ANSI C62.41 Category C
PRODUCT FEATURES
The Surge Series are 3-leaded devices that protect Line-Ground, Line-
Neutral, and Neutral-Ground in accordance with IEEE / ANSI C62.41.2
guidelines. Protects against surges according to IE EE C62.41.2 C High
(10kA and 10kV). Surge current rating = 10,000 Amps using industry
standard 8/20 �Sec wave. Surge Location Rated Category C3. UL
Recognized Component in the United States and Canada (UL1449).
Type 4 Surge Protection Device. High temperature, flame retardant
plastic enclosure, 85°C maximum surface temperature rating. Thermally
Protected Transient Over-voltage Circuit.
0-10V WIRING DIMMING DIAGRAM
FORWARD / REVERSE PHASE DIMMING WIRING DIAGRAM
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZUCO Standard BIOS Illuminated
(A1-ZUCO-STN-BIOS)
CASE DIMENSIONS
Mounting
SnapLOCK / Footed
866.ALUZ.LTG | 714.535.7900
Enclosure Material
Input Needs
Polycarbonate
6", 18AWG stranded, 105°C stripped, 3/8" tinned
PRODUCT SPECIFICATIONS
The Surge series of products are designed to be used in conjunction
with LED Drivers and fi xtures to provide an additional level of
protection against powerline disturbances in industrial, commercial
and residential applications where surge protection to IEEE C62.41.2 is
required.
Page 11 of 11
Surge Protector
Input Frequency
60Hz
Installation Instructions
8 / 9 / 2023 / Rev 0