ALUZ ZUCO Standard BIOS Illuminated 설치 지침 매뉴얼
{카테고리_이름} ALUZ ZUCO Standard BIOS Illuminated에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALUZ ZUCO Standard BIOS Illuminated 11 페이지.
페이지 인쇄100% Frosted Lens
(A1-ZUCO-STN-F)
Stainless Steel
Mounting Clip
(A1-ZUCO-STN-MC)
Aluminum Extrusion
(A1-ZUCO-STN)
GENERAL FEATURES
Applications
Accent, Cove, Under Cabinet Lighting
Lens
Clear, 50% Semi-Frosted, or 100% Frosted
Optics & Asymmetric
15°, 30°, 45°, 60°, 120°, or Asymmetric Optics
Built to Order (+/- 1.8" Tolerance)
Length
See Length Restrictions Table for details
Construction
Aluminum Extrusion
Weight
0.38 lbs per foot
Mounting
Mounting Clips (Sold Separately)
Dry or Damp Location
UL1598, CSA C22.2#250.0
Listing
UL8750, CSA250
UL2108, 67.1.9, 60.4, CSA C22.2 #9
Driver
Remote
Operating / Startup: -20° to 48°C (-4° to 120°F)
Temperature Ratings
Storage: -40° to 76°C (-40° to 170°F)
Installation Link
ELECTRICAL
Dimming
0-10V, DMX, DALI
Luminaire Voltage
120V - 277V (UNV)
MINIMUM & MAXIMUM RUNS
Wattage
1.5W
2W
0-10V & DALI
4'
3'
Minimum Run
0-10V & DALI
39'
27'
Maximum Run
DMX
4'
3'
Minimum Run
DMX
26'
18'
Maximum Run
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZUCO Standard BIOS Illuminated
(A1-ZUCO-STN-BIOS)
LED Board
(Included)
Dry Power Connector w/ Black Jacket
(A1-ZUCO-STN-PC-DRY-BK)
3W
4W
5W
6W
8W
2'
2'
2'
1'
1'
19'
14'
11'
9'
7'
2'
2'
2'
1'
1'
13'
9'
8'
6'
4'
866.ALUZ.LTG | 714.535.7900
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
Important Notice: Verify correct luminaire was received with correct
color temperature, voltage, and wattage before cutting or installing.
ALUZ will not be responsible if incorrect luminaire is installed.
END VIEWS / DIMENSIONS
Clear Lens (CL)
50% Semi-Frosted Lens (SF)
100% Frosted Lens (F)
PRODUCT INFORMATION
• Lighting for accent, cove, edge, under cabinet lighting
• 24 Volts DC for easy and safe installation
• BIOS Illuminated LEDs
• Can be ordered to specifi c lengths for when exact dimensions are known
Example: 10 x 10'6"
• Product is shipped in 8' max luminaires
• Different mounting options available (custom mounting available upon request)
ELECTRICAL REQUIREMENTS
• Luminaires require a 24 Volt DC remote driver.
• To calculate driver size, determine Watts per Foot.
Example: 1.5W per Foot
• Determine Length in Feet.
Example: 30'
• Calculate Load: Multiply Watts per Foot x Length in Feet
Example: 1.5W x 30'= 45W
• Choose a driver from catalog.
Example: 60 Watt Driver
• Determine maximum driver distance using Maximum Wire Length Table on
drivers page.
Example: 45 watts is between 40W and 60W. Using #14 wire, maximum distance
is 37' from driver to fi rst LED.
INSTALLATION TOOLS REQUIRED
• Electric Hammer Drill
• 14.4 to 28 Volt Cordless Drill
• Phillips Bits
• Utility Knife
• Electrical Cord
• Marker
• Wire Stripper
10W
12W
1'
1'
6'
5'
1'
1'
4'
3'
Asymmetric Lens
Optic Lens
(ASM)
(15D, 30D, 45D, 60D)
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tape
• Laser Line or Chalk Line
Installation Instructions
8 / 9 / 2023 / Rev 0
Page 1 of 11
Overview