ALUZ ZUCO Standard BIOS Illuminated Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt oświetleniowy ALUZ ZUCO Standard BIOS Illuminated. ALUZ ZUCO Standard BIOS Illuminated 11 stron.
Drukuj stronę100% Frosted Lens
(A1-ZUCO-STN-F)
Stainless Steel
Mounting Clip
(A1-ZUCO-STN-MC)
Aluminum Extrusion
(A1-ZUCO-STN)
GENERAL FEATURES
Applications
Accent, Cove, Under Cabinet Lighting
Lens
Clear, 50% Semi-Frosted, or 100% Frosted
Optics & Asymmetric
15°, 30°, 45°, 60°, 120°, or Asymmetric Optics
Built to Order (+/- 1.8" Tolerance)
Length
See Length Restrictions Table for details
Construction
Aluminum Extrusion
Weight
0.38 lbs per foot
Mounting
Mounting Clips (Sold Separately)
Dry or Damp Location
UL1598, CSA C22.2#250.0
Listing
UL8750, CSA250
UL2108, 67.1.9, 60.4, CSA C22.2 #9
Driver
Remote
Operating / Startup: -20° to 48°C (-4° to 120°F)
Temperature Ratings
Storage: -40° to 76°C (-40° to 170°F)
Installation Link
ELECTRICAL
Dimming
0-10V, DMX, DALI
Luminaire Voltage
120V - 277V (UNV)
MINIMUM & MAXIMUM RUNS
Wattage
1.5W
2W
0-10V & DALI
4'
3'
Minimum Run
0-10V & DALI
39'
27'
Maximum Run
DMX
4'
3'
Minimum Run
DMX
26'
18'
Maximum Run
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZUCO Standard BIOS Illuminated
(A1-ZUCO-STN-BIOS)
LED Board
(Included)
Dry Power Connector w/ Black Jacket
(A1-ZUCO-STN-PC-DRY-BK)
3W
4W
5W
6W
8W
2'
2'
2'
1'
1'
19'
14'
11'
9'
7'
2'
2'
2'
1'
1'
13'
9'
8'
6'
4'
866.ALUZ.LTG | 714.535.7900
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
Important Notice: Verify correct luminaire was received with correct
color temperature, voltage, and wattage before cutting or installing.
ALUZ will not be responsible if incorrect luminaire is installed.
END VIEWS / DIMENSIONS
Clear Lens (CL)
50% Semi-Frosted Lens (SF)
100% Frosted Lens (F)
PRODUCT INFORMATION
• Lighting for accent, cove, edge, under cabinet lighting
• 24 Volts DC for easy and safe installation
• BIOS Illuminated LEDs
• Can be ordered to specifi c lengths for when exact dimensions are known
Example: 10 x 10'6"
• Product is shipped in 8' max luminaires
• Different mounting options available (custom mounting available upon request)
ELECTRICAL REQUIREMENTS
• Luminaires require a 24 Volt DC remote driver.
• To calculate driver size, determine Watts per Foot.
Example: 1.5W per Foot
• Determine Length in Feet.
Example: 30'
• Calculate Load: Multiply Watts per Foot x Length in Feet
Example: 1.5W x 30'= 45W
• Choose a driver from catalog.
Example: 60 Watt Driver
• Determine maximum driver distance using Maximum Wire Length Table on
drivers page.
Example: 45 watts is between 40W and 60W. Using #14 wire, maximum distance
is 37' from driver to fi rst LED.
INSTALLATION TOOLS REQUIRED
• Electric Hammer Drill
• 14.4 to 28 Volt Cordless Drill
• Phillips Bits
• Utility Knife
• Electrical Cord
• Marker
• Wire Stripper
10W
12W
1'
1'
6'
5'
1'
1'
4'
3'
Asymmetric Lens
Optic Lens
(ASM)
(15D, 30D, 45D, 60D)
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tape
• Laser Line or Chalk Line
Installation Instructions
8 / 9 / 2023 / Rev 0
Page 1 of 11
Overview