Alva GH301 사용 설명서 - 페이지 11
{카테고리_이름} Alva GH301에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alva GH301 12 페이지.
Q:
I just took my heater from storage, but there seems
to be a blue flame rolling on the panels.
Is my heater faulty?
A:
It is normal for dust to settle on the panel. When this
happens, the heater will not burn properly at first, giving
the appearance of a blue flame running on the panel.
This might happen when you first buy the unit after
you have stored it.There is nothing wrong with the
heater. Simply burn the dust off the panels by letting
the heater run on HI for between 5 and 15 minutes.
The panels should eventually settle and burn red.
Q:
What do I do if I have an over-filled cylinder?
A:
The best method to determine if your cylinder is over-
filled is to weigh it.Subtract the 'tare' mass from the
cylinder weight – this gives you the weight of your gas.
If this gas weight exceeds your cylinder design weight
(3kg) then return the cylinder to your gas
supplier.
Model
Type of Gas
Operating pressure
Injector size
Gas Consumption
Heat output
This heater has been tested and is LPGSASA approved under
specifications SANS 1539 (appliance), SANS 1237 (regulator)
and SANS 1156 (hose).
SPECIFICATIONS
ALVA GH301
LPG
2.8kPa
0.95
165gr/hr
4.2kW
9