Alva GCS04 매뉴얼 - 페이지 6

{카테고리_이름} Alva GCS04에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alva GCS04 12 페이지. Automatic gas cooker two burner stainless steel stove
Alva GCS04에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

Fig.8

•

In the event of a burn back (i.e. where the gas burns back

on to the jet), turn off the stove and light again. Should the

problem persist, take the unit back to your dealer to be

checked.

•

Turn the stove off at the switch controls

•

Disconnect the regulator and wait for the stove to cool

down (± 30 minutes)

•

If on relighting, the problem reoccurs, get the unit

checked by an authorised service dealer

•

Always check that the regulator seal is in place and in good

condition. Always ensure that the hose clamps are tightened

and in place. Always ensure that the hose does not show

any signs of wear. If in doubt please consult your dealer.

SETTING UP YOUR COOKER

Fig.9

OFF

MAX

MIN

Fig.10

Consult your gas dealer if the

leak persists after tightening

the joints. (Fig. 7)

•

Place the gas cylinder at least

0.5m away from the stove in an

upright position. (Fig. 8)

•

Only use LPG gas.

•

For safety reasons, the control

/ignition knobs are designed

to operate in anti-clockwise

rotation.

1. Confirm that you have the right

model for your type of gas

supply.

2. When unpacking, make sure

that all of the parts of the gas

cooker are included. Assemble

the parts as shown in Fig. 9.

3. Place the gas control knob

onto the gas cock axis and

push it inwards. (Fig. 10)